2027-W09 Development of an Integrated Approach for the Removal and Destruction of Short- and Ultrashort-chain Per- and Polyfluoroalkyl Substances (PFAS) from Contaminated Water Systems

PROJECT HIGHLIGHTS

  • Collaborate with volunteers to map PFAS contamination in UK waters. 
  • Develop and test innovative capture methods for highly mobile short and ultra-short chain PFAS, pairing these with electrochemical destruction technologies.  
  • Work in a friendly and cooperative research group at a world leading institution, with the ability to engage with river conservation experts, industry and government partners. 

Overview

Environmental per- and polyfluoroalkyl substance (PFAS) pollution is a huge concern due to their persistence and adverse effects on human health and ecological systems. Several medium and long chain PFAS have been regulated, resulting in a shift towards alternatives, such as short and ultra-short chain compounds including trifluoroacetic acid (TFA), perfluorobutanoic acid (PFBA) and perfluorobutane sulfonic acid (PFBS). However, toxicological evidence suggests that these PFAS also cause environmental and health risks. TFA is of particular concern due to its high environmental mobility and ubiquity, typically being detected at concentrations up to two orders of magnitude higher than longer chain PFAS (Chen et al., 2018; Li et al., 2025). 

Whilst research is underway to develop PFAS removal technologies from water, most approaches have focused on legacy and long-chain PFAS. In contrast, short and ultra-short compounds have received little attention. PFAS concentrations in rivers and other contaminated surface waters are typically in the ng/L range, meaning that effective treatment requires a capture and preconcentration step before a destruction process. However, conventional preconcentration methods, such as granular and powdered activated carbon and ion-exchange resins, are often less effective for capturing short- and ultrashort-chain PFAS because of their high hydrophilicity and mobility, resulting in rapid breakthrough (Gagliano et al., 2020; Liddie et al., 2026; Scheurer et al., 2017). 

This project aims to develop a PFAS treatment system capable of capturing and preconcentrating short- and ultrashort-chain PFAS from contaminated water sources, followed by their destruction using electrochemical advanced oxidation processes. The focus will be on TFA, PFBA and PFBS. At the first stage of the project, the occurrence and concentrations of these PFAS in UK waters will be mapped through field sampling campaigns and mass spectrometric analysis, with support from Rivers Trust volunteers. Sorbents such as metal-organic frameworks and modified ion-exchange resins, as well as nature-based approaches including phytoremediation (PFAS uptake into plants), will be investigated. Where appropriate, methods for controlled desorption of the PFAS will also be investigated. These concentrated PFAS solutions will be subjected to electrochemical advanced oxidation methods, which offers great potential for complete PFAS destruction through C–F bond cleavage.  

Figure 1: Schematic overview of the proposed project, showing: Monitoring: measuring short-chain PFAS in volunteer collected river water samples from around the UK, to identify types and concentrations of short chain PFAS. Capture: Developing testing and deploying capture methods to remove PFAS from natural waters, including metal organic frameworks, resin ion exchange, and plant materials. Destruction: Utilising electrochemical destruction technology to destroy PFAS and contaminated materials. 

Three boxes showing the overview of the project. Box one is labelled “monitor” and shows a stylised map of the UK with targets in different colours representing the amount of PFAS. The structures of PFBA, PFBS and TFA are also drawn and labelled. The capture box shows three proposed capture technologies in boxes, MOFs, Resins and Plants, clean water (indicated by a tap) comes out of the filters, as does PFAS waste. Destroy shows the PFAS being destroyed in an electrochemical cell, PFAS goes in and F- and CO2 comes out.

Case Projects

This project does not offer a CASE studentship

Host

Theme

Supervisors

Project investigator

Co-investigators

How to apply

Each host has a slightly different application process.
Find out how to apply for this studentship.

All applications must include the CENTA application form.
Choose your application route

The project requires development of liquid chromatography–mass spectrometry (LC-MS) analytical methods for the detection and quantification of short and ultra-short chain PFAS in environmental samples, and for monitoring their removal during destruction experiments. Fluorine nuclear magnetic resonance (19F NMR) based analytical approaches will also be investigated for quantifying time dependent PFAS removal during destruction experiments. High/ultra-high resolution mass spectrometry will be used for tracking of intermediates during the PFAS destruction process. Suitable methods will be developed for removing adsorbed PFAS from the different adsorbents investigated. PFAS destruction will be carried out using in-house electrochemical advanced oxidation systems which use boron doped diamond electrodes integrated into recirculating flow cells. Monitoring of fluoride ion (F–) release during the electrochemical destruction process will be made using F– ion selective electrodes. Whilst the majority of work will be carried out in the laboratory there will be opportunities for environmental field sampling.  

DRs will be awarded CENTA Training Credits (CTCs) for participation in CENTA-provided and ‘free choice’ external training. One CTC can be earned per 3 hours training, and DRs must accrue 100 CTCs across the three and a half years of their PhD.  

The student will receive the required analytical training from experts within the research group (in analysis, electrochemistry, LC-MS and NMR) and within the wider department, especially when considering use of multiple MS techniques (Dr. Lijiang Song, Joanna Drozd). Simon Browning (Rivers Trusts) will provide training in the environmental sampling (collection) of water sources. The students will also be trained in how to analyse the data collected with consideration of errors. Training will also be given in 3D printing for electrochemical cell preparation along with skills in presentation, report and paper writing. 

The Macpherson group is highly collaborative working with a large range of partners, including industrial and charity/government organisations. The group has three collaborations which are relevant to this proposed work: (1) An ongoing relationship with the Rivers’ Trust to develop low-cost sensors for citizen science, this collaboration would provide the student with training in the collection of freshwater river samples. (2) Work with our local water authority (Severn Trent) investigating electrochemical PFAS destruction technologies related to drinking water. (3) A new collaboration with the Environment Agency, using their data to understand PFAS compounds of greatest concern in water systems. 

Year 1: Training in analytical techniques and electrochemical advanced oxidation processes. Development of quantitative method for short/ultrashort chain PFAS detection using MS. Investigation of the short/ultrashort chain PFAS contamination levels across UK water samples. 

Year 2: Exploration of current pre-concentration methods to determine efficiency for TFA, PFBA and PFBS. Comparison of current pre-concentration methods with new approaches e.g. phytoremediation, metal organic frameworks, modified ion exchange resins for TFA. Development of appropriate extraction and desorption methods, with a focus first on TFA. Initial exploration of electrochemical destruction. 

Year 3: Exploration of PFBA, PFBS, use of real solutions from the field, such as river water systems.  

Year 4 (6 months): Completion of outstanding experiments, writing of PhD thesis. 

Chen, H., Yao, Y., Zhao, Z., Wang, Y., Wang, Q., Ren, C., Wang, B., Sun, H., Alder, A. C., & Kannan, K. (2018). Multimedia distribution and transfer of per- and polyfluoroalkyl substances (PFASs) surrounding two fluorochemical manufacturing facilities in Fuxin, China. Environmental Science & Technology, 52(15), pp. 8263–8271. doi: 10.1021/acs.est.8b00544. 

Gagliano, E., Sgroi, M., Falciglia, P. P., Vagliasindi, F. G. A., & Roccaro, P. (2020). Removal of poly- and perfluoroalkyl substances (PFAS) from water by adsorption: Role of PFAS chain length, effect of organic matter and challenges in adsorbent regeneration. Water Research, 171, 115381. doi: 10.1016/j.watres.2019.115381. 

Li, J., Boxall, A., Swan, C., Wilkinson, J., McGimpsey, N., Evans, H., Kirton, M., Stanforth, R., Gunby, C., Niemi, L., Taggart, M., Robison-Smith, C., Tarring, E., Bloor, M., & Gauchotte-Lindsay, C. (2025). Concentrations of trifluoroacetic acid (TFA) in UK surface waters. Available at: https://eprints.gla.ac.uk/358007/1/358007.pdf 

Liddie, J. M., Kim, E., Haque, F., Roche, A., Sontarp, E. J., & Sunderland, E. M. (2026). Trifluoroacetic acid (TFA) exceeds all other extractable organofluorine in drinking water from Eastern Massachusetts, United States. Environmental Science & Technology Letters, 13(8), pp. 1157–1163.  doi: 10.1021/acs.estlett.6c00404. 

Scheurer, M., Nödler, K., Freeling, F., Janda, J., Happel, O., Riegel, M., Müller, U., Storck, F. R., Fleig, M., Lange, F. T., Brunsch, A., & Brauch, H.-J. (2017). Small, mobile, persistent: Trifluoroacetate in the water cycle – Overlooked sources, pathways, and consequences for drinking water supply. Water Research, 126, pp. 460–471. doi: 10.1016/j.watres.2017.09.045. 

Further details and How to Apply

For more information contact: Prof. Julie Macpherson ([email protected]), Dr Joshua Tully ([email protected]), Simon Browning ([email protected]) and Dr. Emma Pemberton ([email protected]).

For more information on the Warwick Electrochemistry and Interfaces Group see: www.warwick.ac.uk/fac/sci/chemistry/research/electrochemistry. 

To apply to this project:  

  • You must include a CV with the names of at least two referees (preferably three) who can comment on your academic abilities.  

 Applications must be submitted by 23:59 GMT on Wednesday 6th January 2027.   

you are here:
Skip to content